E-mail: j.li@szhuateng.com

Home > News

How to Choose the Cooling Tower?

Dec. 10, 2020

Since the water-cooled chiller needs the help of the cooling tower during its operation, after purchasing the water-cooled chiller, it is necessary to complete the normal operation of the water-cooled chiller according to the relevant experience introduced by the chiller factory to ensure the water-cooled chiller unit has high performance.

How to choose to buy a cooling tower?

In the actual use environment, there are different types of cooling water towers. Simply distinguished from the shape, domestic cooling water towers are divided into two types: rectangular and circular. As for specific functions, rectangular and circular cooling towers have similar functions, and there is no According to the introduction of the water-cooled chiller supplier, the circular cooling tower can adapt to more used environments and achieve the purpose of improving the working efficiency of water-cooled chillers.

Determine the model and specific specifications of the cooling tower

Different water-cooled chillers need to be matched with cooling towers of different specifications. In the selection process, it is necessary to select the appropriate cooling tower equipment according to the specific data of the cooling water flow, and at the same time, ensure that the water flow is in a more suitable state to ensure water cooling. According to the requirements of the chiller factory, the water flow rate of the cooling tower should not be higher than 20%. As long as it meets the specific value range, it can meet the requirements of the water-cooled chiller.

Water Cooled Screw Chiller


In the process of purchasing a cooling water tower, as to which specifications to choose, you need to complete the entire selection process according to actual needs, such as the specific operating power of the water-cooled chiller, and the amount of water inflow and discharge, combined with specific data to select the appropriate cooling tower product At the same time, it should be noted that normal water-cooled chillers need to be equipped with a cooling water tower. The number of cooling water towers to be purchased needs to be determined according to the actual number of water-cooled chillers, and the principle of one-to-one purchase is realized, so as to meet the normal conditions of water-cooled chillers. Operational requirements.

For the introduction of cooling tower selection techniques, users can realize that water-cooled chillers can meet daily production needs only when they cooperate with cooling towers. The lack of any equipment has a great impact on cooling towers. Therefore, choosing high-quality cooling towers will improve The specific performance of water-cooled chillers plays a vital role. Of course, it is also very important to choose a high-quality water-cooled chiller.

This series of chillers use highly efficient semi-hermetic screw compressors. The compressor adopts a 5:6 asymmetric high-efficiency screw rotor, which can adjust the energy in stages or infinitely. It will automatically adjust according to load changes and is more energy-efficient. The heat exchanger of the unit adopts high-efficiency heat exchange tubes to improve the cooling efficiency. The unit is equipped with multiple protections to make the unit operate safely and reliably.

Features of chiller

1. Using the original single/double SCREW compressor, the compressor can be automatically adjusted according to the load, and the liquid level sensor is added to prevent the compressor from low load luck and prolong the service life

2. Adopt new imported advanced components

3. Two sets of compressors can be used together or independently

4. Switch control, convenient operation and maintenance

5. No oxidation of brass pipe weld

6. Both the condenser and the evaporator comply with GB150, GB151, TB/T4750-2003, and are safe to operate.

If you want to get more information about good quality chillers, please contact us.

Contact Us
  • Mobile: +86 15262310939
  • Tel: +86 15262310939
  • Fax: +86 512 6586 4778
  • E-mail: j.li@szhuateng.com
  • WhatsApp/Wechat : +86 15262310939
  • Add: No.1, Nanhuan Road, Qingyang Town, Jiangyin City, Jiangsu Province, China
Follow Us
what is a screw chiller220v water cooled screw chiller factory-30 degree low temperatue water chiller300 rt air cooled chiller manufacturer300 rt air cooled chiller supplier380v water cooled screw chiller50hz water cooled screw chiller50hz water cooled screw chiller manufacturer50hz water cooled screw chiller supplierdifference between cooler and condenserchiller vs heat exchangerdifference between chiller and heat pumpdifference between heat exchanger and cooler