In household or commercial facilities, one of the areas that people often want to know about heating and cooling air is the difference between air conditioning and chiller systems. Although they usually share the same goal in regulating air temperature, each system works very differently and produces very different results. Here are the main differences you need to know when viewing an air conditioning installation in Loganville, Georgia.
It sounds like the air conditioner adjusts the temperature of the room. It can convert air into hot or cold air according to its settings. It is also designed to dehumidify an area. In refrigeration, the basic refrigeration principle is used: the condenser takes away heat and is located on the "hot" side of the air conditioner. The condenser transfers heat to air or water or glycol fluid and removes it from the air to be circulated.
In most air conditioning systems used for refrigeration, the main refrigerant is frozen water. The air passes through a circle of frozen liquid, and heat is transferred from the air to the frozen water. Frozen water circulates through, so when air passes through, frozen water always exists. If you install heating and air systems in Loganville, Georgia, this ambient temperature maintenance is most common in offices, homes, and retail stores.
Air Cooled Screw Chiller
Using a cooler, heat is removed from the liquid by a steam compression or absorption refrigeration cycle. The cooled liquid passes through the pipes in the building and the coil in the air processor or through the fan coil unit, which helps to dehumidify the air.
Usually, water chillers are air-cooled and water-cooled. The air-cooled chiller is located outside the facility, and the condenser coil is cooled by fan-driven air. Water-cooled chillers are usually located internally and the water is circulated to the radiator or external cooling method. External cooling methods can include cooling towers or, in some cases, water supply cooling systems, which are more effective in terms of heat dissipation.
Water chillers are also powered in different ways. There are four types: reciprocating, centrifugal, screw drive and absorption. The first three are powered by electric motors, steam or gas turbines. Absorption is powered by a heat source, such as steam or hot water. In general, heating and air management in Logenville, Georgia, in a manufacturing environment, if equipment is involved, will be done by a cooler.
Water Cooled Screw Chiller
Air conditioners allow precise adjustment of air temperature and humidity levels in narrower spaces. Air conditioners are used in homes, small buildings and some offices, and the size and practical application of the units are different.
Cooler-driven refrigerants have applications in cooling equipment and other manufacturing processes, such as MRI machines, assembly processes and tools. Air-cooled chillers are used to cool fluids and dehumidify air in larger locations in commercial and industrial facilities, such as factory workshops, arenas and hotels.
The difference between air conditioners and chillers may be subtle at the level of the cooling process, but they are quite different in application. If you are looking for system installation or heating and air conditioning maintenance, if there is no other reason, it is worthwhile to understand these differences in addition to the correct system maintenance.