Here is a Air Cooled Screw Chiller Manufacturer talking about the use of chiller in air conditioning.
If you want to know about Air Cooled Chiller Price, feel free to let us know.
Air Cooled Chiller Price
In an air conditioning system, chilled water is usually distributed to heat exchangers, or coils are cooled in air handling units, or other types of terminal equipment in their respective spaces (S air), then cooling water is distributed from the head back to the cooling is cooled . These cooling coils carry sensible heat and latent heat from the air to the chilled water, thus typically dehumidifying the cooling air stream. A typical air conditioning unit is rated for 15 to 1500 tons (180,000 18,000,000 British thermal units / h or 53 to 5,300 kW). The chilled water temperature ranges from 35 to 45 degrees Fahrenheit or 1.5 to 7 degrees Celsius, depending on the application.
In the chiller refrigerant recirculation system, the liquid refrigerant in the transpiration absorbs the heat in the water and begins to transpire. The final refrigerant forms a certain temperature difference with the water. The liquid refrigerant is also completely transpiration and becomes gaseous and then sucked by the compactor. Tightening, the gaseous refrigerant absorbs heat through the condenser, and is condensed into a liquid. After being saved by the thermal expansion valve, it becomes a low-temperature low-pressure refrigerant to enter the transpiration device, and the refrigerant regenerative process is completed.
When the chiller is finished, because of the type of material, the size and shape of the finished product are different, and the clamping force required is also different. When adjusting the mold, please adjust according to the minimum clamping force of the actual demand. In this way, power consumption can be saved and the life of the machine can be significantly extended.
Industrial chillers must pay attention to the safety of the machine when using the machine. Please check the safety equipment of the machine at the beginning of each operation, and ensure the reliability of the ejector and safety door. In the process of machine work, keep in mind that you should not reach into the clamping structure. When taking the finished product, the safety door must be opened. The safety door must be closed after acknowledging personnel safety and no foreign matter in the mold. In addition, the hand cannot reach between the nozzle and the mold gate during work. When repairing the mold, close the oil pump motor.
We have Air Cooled Chiller For Sale. If you want to learn more about the information, welcome to follow our website.